The Hua Yun IHP5Z - IHP15Z series peristaltic pumps are designed to transfer fluids up to 26 GPH at pressures up to 174 PSI. When operated at about 30 RPM for ≤ 8 hours daily you can expect approximately 1,200 hours of hose life.
EPDM
Natural rubber (industrial and food grade)
Nitrile Rubber (industrial and food grade)
If you are not sure about fluid compatibility we can assist you and provide samples for soak testing.
The connections typically consist of stainless steel hose barbs or tri-clamp fitting although we can accommodate other connection types and materials.
The ½ HP motor is available with several gearbox ratios with our standard gear box ratio set-up for continuous duty flow rates (approximately 30 RPM).
We can accommodate special motors such as single phase or motors suitable for hazardous duty locations.
The shaded green area represents the maximum flow rate for continuous duty applications, the specification sheet link below has a full size and easy to read performance and dimensional charts.
Depending upon the hose size the displacement from 6 to 18 milliliters per revolution and intermittent applications can be sized for up to 60 RPM.
1/4", 3/8" or 5/8" ID hose is only wearable part
Solids as large as 1/16"
Viscosity up to 15,000 cps
Liquid temperatures up to 194ºF
Maximum Discharge Pressure: 174 PSI
Maximum Suction Lift: 7 feet depending upon hose size and viscosity
Maximum Suction Pressure: 15 PSI
Maximum HP: ½