Peristaltic Pumps for High Pressure Transfer

Hose pumps for 4 to 106 GPM at pressures up to 232 PSI

The Hua Yun IHP40Z - IHP65Z series peristaltic pumps  are designed to transfer fluids up to 106 GPM at pressures up to 232 PSI.  Since it is an industrial duty peristaltic pump, when operated ≤ 30 RPM for ≤ 8 hours daily you can expect approximately 1,200 hours of hose life.  If you are not sure about fluid compatibility we can assist you and provide samples for soak testing.

 

Hua Yun peristaltic pump hose materials include:

• EPDM

• Natural rubber (industrial and food grade)

• Nitrile Rubber (industrial and food grade)

 

Stainless steel ANSI flanged connections are standard although we can supply other connection types and materials.

 

We offer several gear motor sizes, ranging from 3 to 10 HP depending upon pump model with our standard gear box ratio set-up for continuous duty flow rates (approximately 34 RPM).

 

We can accommodate special motors such as single phase or motors suitable for hazardous duty locations.

The shaded green area represents the maximum flow rate for continuous duty applications, the specification sheet link below has a full size and easy to read performance and dimensional charts.

 

Depending upon the hose size the displacement from 0.34 to 1.75 gallons per revolution and intermittent applications can be sized for up to 60 RPM.

 

Model IHP40/50/65Z peristaltic pumps feature:

• 1½", 2" or 2½" ID hose is only wearable part

 

Model IHP40/50/65Z peristaltic pumps can handle:

• Solids from 6mm, 7.5mm or 9.75mm depending upon hose size

• Viscosity up to 15,000 cps

• Liquid temperatures up to 194ºF

 

Specifications for the Model IHP40/50/65Z industrial peristaltic hose pumps:

• Maximum Discharge Pressure: 232 PSI

• Maximum Suction Lift: 14 - 24 feet depending upon hose size and viscosity

• Maximum Suction Pressure: 18 - 25 PSI

• Maximum HP: 10

 

Additional information about the model IHP40/50/65Z peristaltic pumps:

• The approximate cost, including gear motor is $3,507 -  $7,590 depending upon hose material, motor size and connection type

• Model IHP40/50/65Z specification sheet