
The
ANSI Centrifugal Pump that sets the industry standard for
corrosive and abrasive process fluid applications.
Stancor ANSI Centrifugal Pumps provide exclusive design
advantages over all other centrifugal pumps. For applications
requiring durability and performance on dirty, difficult fluids,
Stancor pumps are by far the most cost-effective solution.
Stancor ANSI Centrifugal Pumps conform to ANSI B73.1 specification for
dimensions, shaft deflections and bearing life. If you've ever wanted an
alternative to costly high-alloy pumps, wicking associated with fiberglass
pumps, or the complications of lined pumps, Stancor ANSI pumps are what
you've been looking for!
Stancor Centrifugal Pump solid component construction means:
- No liners separating or collapsing
- No permeation
- Impellers that can be trimmed to your application
In addition to solid liquid end components,
Stancor ANSI Centrifugal Pumps also has the following features
to enhance mechanical seal life:
- Concentric casing which reduces hydraulic
imbalances in the ANSI pump casing
- Duplex angular contact bearings which
eliminate any axial motion of the impeller and shaft
TYPICAL
APPLICATIONS |
- Acetone
-
Aluminum
Fluoride
-
Bromic Acid
-
Calcium
Hypochlorite
-
Chlorine, wet
-
Chromic Acid
|
- Copper Chloride
-
Ferric Chloride
-
Hydrochloric
Acid
-
Hydrofluoric
Acid
-
Magnesium
chloride
-
Mercuric Acid
|
- Nitric Acid
-
Phosphoric Acid
-
Sodium Fluoride
-
Sodium Hydroxide
-
Sodium
Hypochlorite
-
Sulfuric Acid
|
Designed by the process
industry, for the process industry:
-
Cost-effective, rugged
and durable design
-
Smooth, full-curve
performance
-
Stancor pumps are
available in sizes 1-1/2 x 1 x 6 to 3 x 4 x 12
-
These sizes will
provide flows to 700 GPM and heads to 350 feet
-
Temperatures to 325° F.
Working Pressure: |
200 PSIG |
TT
Temperature: |
-20F to 325F |
Capacity: |
2-700
GPM |
Pressure: |
up to
350 Feet |